Made to fit the Sparco GP Formula style seat (make sure your model is the same as the one on the picture).
This is a design inspired by the 2022 HRC F1
If you need a specific design, send us an email at firstname.lastname@example.org and we will work on it.
Place the sides first and use the cutout to get the piece centered.
Then place the middle part using the sides as reference
Be careful with the biggest piece and make sure it is aligned properly before finalizing the application.
Air release vinyl is used for these wrapping kits to help you avoiding bubbles during the process. You can heat up the vinyl slightly to remove creases to some extent.
Apply on a dry and clean surface. Remove backing paper and smoothly apply on your surface.
Covering stickers, they are not designed for peeling off and on after application.
🇬🇧All our stickers are printed on Monomer based Vinyl (if not stated otherwise) and are UV and weather protected (5 to 7 years lifetime ).
🇫🇷Tous nos stickers sont imprimés sur du Vinyle monomère (sauf si indiqué autrement) et sont recouverts d'une protection UV et intempéries (durée de vie 5 à 7 ans).