MOZA GS Skins: Choose a Livery Around Your Controls

GS, MOZA, Sim Racing -

MOZA GS Skins: Choose a Livery Around Your Controls

The MOZA GS puts five rotary dials at the centre of your racing setup. A new livery changes the face around those controls, so choosing a skin is about more than picking a favourite team: the dial markings, cutouts and overall colour balance deserve a close look too.

Lovely Stickers has a dedicated MOZA GS sticker collection, from endurance-inspired graphics to a restrained printed-carbon finish. Here is how to choose a design and prepare for installation.

Cover: Peugeot 9x8-inspired GS skin. Computer-generated product rendering by Lovely Stickers.

Which MOZA GS do you own?

Start with the full model name. GS, GS V2 and GS V2P belong to the GS line; Vision GS is a separately named wheel. A shared “GS” in a product title is not enough to choose a sticker template.

MOZA’s December 2022 GS V2 announcement describes a 300 mm GT wheel with perforated microfibre leather grips, a forged-carbon frame, ten backlit buttons, five rotary dials, two thumbwheels and two joysticks. Its dual-clutch paddles and programmable shift lights round out a layout built around frequent adjustments.

Official MOZA GS V2P front detail showing five rotary dials, illuminated buttons and perforated grips
The GS V2P in its original MOZA finish. This official view identifies the hardware generation; the LS designs below are listed in our catalogue as MOZA GS.
Image credit: MOZA Racing.

Our linked sticker listings specify MOZA GS Wheel. They do not separately name every V2/V2P revision. If yours carries one of those suffixes, send the exact model and a clear front photo to info@lovelystickers.com before ordering so we can confirm the correct template. For wheelbase compatibility, use MOZA’s hardware compatibility guide; that is a different check from sticker fit.

Look closely at the five dial surrounds

The middle of the GS is visually busy. Before choosing a skin, open both the on-wheel rendering and the flat artwork on the product page. The rendering shows the overall effect; the artwork lets you inspect the printed scales without the knobs hiding part of them.

On the Peugeot design below, coloured numbered rings frame the five dials. The artwork replaces much of the original faceplate labelling with its own graphics. If you rely on those labels to remember your mappings, compare them with your usual controls before choosing. A sticker changes the appearance, while your assignments remain a software setting.

Flat MOZA GS Peugeot-inspired sticker artwork showing the five numbered dial rings and openings for controls
The flat Peugeot-inspired artwork makes the dial scales and pre-cut openings easier to inspect. This is artwork, not a customer installation.
Image credit: Lovely Stickers.

Three different directions for your GS

Peugeot 9x8: a bold endurance look

The 2024 Peugeot 9x8-inspired livery combines white, yellow and black with angular lines and dotted areas. It gives the face a very different character from the original dark finish. Choose it if you want the wheel itself to be a strong visual feature of the rig, especially alongside an endurance-themed seat or base.

Aston Martin: a more unified colour scheme

The 2023 Aston Martin-inspired design uses a broad turquoise-green area, a dark lower section and a bright accent line. Compared with the Peugeot artwork, the larger blocks of colour make the overall composition feel calmer. Check the rendering against the colours already on your rig rather than judging the skin in isolation.

MOZA GS rendering with turquoise-green and black Aston Martin-inspired Lovely Stickers graphics
Aston Martin-inspired artwork uses broad colour blocks across the GS face. Computer-generated product rendering.
Image credit: Lovely Stickers.

Printed carbon: keep the palette dark

The Printed Carbon Only skin swaps the racing graphics for a woven-carbon appearance. The pattern is printed on vinyl: it is not a replacement carbon-fibre faceplate. This is the option to consider if you want a quieter look while retaining the coloured dial surrounds shown in the artwork.

Lovely Stickers MOZA GS rendering with a printed woven-carbon pattern and coloured dial rings
Printed-carbon artwork on the GS. The woven effect is a printed graphic, not structural carbon fibre. Computer-generated product rendering.
Image credit: Lovely Stickers.

Installation: the knobs are the important detail

The GS product instructions say you do not need to take the wheel apart: the skin goes around its buttons and other features. The knobs do need to be removed using a hex key. Plan for that step before peeling the backing paper.

  1. Compare first. With the backing still on, check the skin against your wheel, particularly the dial openings and top LED slot.
  2. Prepare the face. Follow the product instructions for knob removal and make sure the application surface is clean and dry.
  3. Align before pressing down. Use the control openings to judge placement, then apply smoothly. Keep the buttons, dials and LED window clear.
  4. Check the finished controls. Once the knobs are back in place, confirm that the controls move freely and the lighting remains visible.

These are laminated polymer-based stickers, not reusable skins intended for repeated removal and reapplication. For a visual explanation of the general application method, see our wheel-skin tutorial; the GS-specific knob instruction above still applies.

Build the look around the wheel

A useful starting point is one dominant colour and one accent shared across the rig. A vivid wheel can sit against a plain base, or you can carry the theme further with a matching design. If you also own an R5, R9 or R12, our MOZA base-skin guide explains how to choose the correct base version.

Explore the MOZA GS sticker collection, open the full artwork of your favourite design, and check the model before ordering. Looking for another livery? Email info@lovelystickers.com with your wheel model and design idea.

Product information and linked sources checked on 11 November 2026. Hardware image: MOZA Racing. Sticker artwork and on-wheel renderings: Lovely Stickers.


Leave a comment