Thrustmaster T598: Match Your Base and Wheel with One Livery
The Lovely Stickers T598 kits featured here are designed for the wheel base and the original steering wheel. That is the useful starting point if you want to give the whole setup a coordinated racing livery. The large base panels and the centre of the rim play different visual roles, and both deserve attention before you choose a design.
Thrustmaster published a new T598 firmware-update walkthrough on 29 October 2026. It is a good occasion to revisit an existing setup: check its software, identify the wheel you actually use, then decide how you want it to look. Here is what matters for choosing a T598 sticker kit.
Cover: Lovely Stickers catalogue rendering of the Gulf Porsche 917-inspired kit, not a customer installation photo.
Know the three parts of your T598 setup
The T598 PlayStation/PC package combines a servo base, a detachable Sportcar wheel and Raceline Pedals LTE. Thrustmaster lists PS5, PS4 and PC support for this version. Its axial-flux drive is rated at 5 Nm constant torque, with temporary overshoot effects; that distinction matters when reading torque claims.
The original wheel is 30 cm across, with rubber grips, magnetic paddle shifters and a multifunction encoder. The Race Dash display sits on the base. Supported information and effects depend on the game.

Image: Thrustmaster.
What does the LS T598 kit cover?
The product descriptions for the Gulf Porsche 917, 2026 Scuderia Ferrari F1 and BMW M V8 Hypercar designs all specify the T598 wheel base and original steering wheel. Their references are T598006, T598005 and T598007 respectively.
Look at the flat kit artwork as well as the assembled rendering. The long pieces belong to the base treatment; the smaller shaped pieces follow the wheel face. This is why choosing by the name of your wheel base alone can be misleading when you have fitted a different rim.

Image: Lovely Stickers.
The artwork also shows what stays visible. Your rubber grip, buttons and display remain part of the finished look. Think of them as the black framework around the livery, rather than expecting a solid-colour wrap over every surface.
One setup, three different racing identities
The Gulf-inspired kit in the cover uses pale blue, an orange centre stripe and a number panel. On the broad base, those colours create a large backdrop; on the wheel face, the stripe becomes the focal point. It is an easy palette to carry into a cockpit with another blue or orange detail.
The 2026 Scuderia Ferrari-inspired design makes a stronger red statement, with white sections breaking up the base and lower spoke. The BMW M V8 Hypercar design uses more angular blocks of white, black, blue and red. Compare the largest colour areas first, then the small sponsor details: the base is often seen from the side, while the wheel faces the driver.

Image: Lovely Stickers.
Already using an SF1000 or Ferrari 488 GT3 rim?
Thrustmaster's ecosystem includes alternative wheel add-ons, with adapters required for some combinations. A wheel that connects to the T598 does not acquire the shape of the original Sportcar rim. The T598 kit's wheel-face pieces therefore should not be chosen for an SF1000 or Ferrari 488 GT3.
Use our SF1000 skin guide or Ferrari 488 GT3 skin guide for those faces. If you want a coordinated base-and-replacement-wheel design, send the two model names and your preferred livery to info@lovelystickers.com before ordering so we can check the appropriate products together.
Update the software, then prepare the surfaces
The October walkthrough uses My Thrustmaster Panel on a Windows 10 or 11 PC, with the base connected and powered on. Follow the official instructions for the current software and any driver prompts.

Image: Thrustmaster.
Once your software check is complete, switch off and disconnect the equipment before working on the exterior. The LS instructions call for a clean, dry surface. Lay out the pieces with their backing still attached, identify the base panels and wheel pieces, and compare the edges and openings before exposing any adhesive. Keep the screen, controls, connectors and ventilation openings clear.
Apply each piece smoothly, taking time over the initial alignment. The featured products use polymer-based stickers and are not intended for repeated peeling and reapplication. Our wheel-skin tutorial explains the general application technique; use the T598 artwork for the actual shape and placement.
Choose the livery for the setup you own. Browse the T598 collection and compare the original wheel shown with yours. For a different rim or an uncertain version, use Contact with a clear front photo and the design link.
Sources checked 4 November 2026: the linked Thrustmaster T598 PlayStation/PC product page and firmware guide dated 29 October 2026; the three linked Lovely Stickers product descriptions and artwork. Hardware photographs: Thrustmaster. Livery renderings and kit artwork: Lovely Stickers.